What to do if your garage door keeps stopping?
Automatic garage doors are a blessing like so many other modern appliances that make our
everyday
life easier. They not only pamper us in terms of saving our time but energy
too. For example, when talking about electric garage doors, you don’t need to
get out of the car and bend and lift the door up and then do the opposite to
close it. All of this is possible with just a single push of a button, thanks
to automatic garage door openers. However, dependency sometimes can be very
harsh. What if the chain breaks down or the remote stops responding? What if
you are stuck in a situation where your garage door won’t open or keeps on
stopping when you try to close it?
So what to
do when your garage door stops when you try to close it? Become a bit of
Sherlock Holmes and start the investigation.
Check for
obstruction object.
The primary
culprit can be an obstruction. Automatic garage doors make use of sensors to
know if something is present beneath them. Investigate and find out if
something is blocking the way because your garage door won’t close if
something’s in the way. Even a tiny item such as a twig can set off the alarm.
So, sweep the area clean and make sure nothing is present to disturb you.
Make sure
the track is not blocked.
Make sure
nothing is blocking or jamming the track. For the garage door to open and close
smoothly, it needs to have a crystal clear track, and if even something tiny
comes in the way, the door can stop working. Use a flashlight to ensure no
object is hindering the way.
Do you have
a broken tension spring?
A broken or
stretched tension spring is another reason why your garage door keeps on
stopping. If this is the case, you need to call garage door repair experts
because trying to make it a DIY project can harm you or permanently damage the
door.
Check if
sensors are okay.
If no
obstruction is present, the next investigation target should be sensors.
Automatic garage doors have photo-eye sensors that ensure the doors don’t close
on someone or something, causing serious damage. These sensors can be
misaligned, interfering with the doors mechanism to operate properly. You
should see lights on both the sensors, and they should blink or be lit. If any
one or both lights are out, realign the sensors to make the door up and
running.
If you have
tried all the troubleshooting methods and your garage door still keeps on
stopping, it’s time to call professional help by contacting our door repair services in Auckland.
Comments
Post a Comment